扫一扫,“购”惊喜

当前位置:首页 > Products > Cusomized Products > Traffic screen controller > BX-JT1

BX-JT1

Professional supporting LED traffic signal screen, to meet the countdown and comprehensive information display. Complying with the national standard of GA/T508-2014 "Countdown Display of Road Traffic Signals", intelligently and fully automatically follows

Isolate network invalid data, adapt to busy and complex networks, and make communication more stable.

Onboard standard 100M network port+RS485+RS232+USB communication interface, optional wifi, optional 4Gm, optional YYm.

1 nos of T12 and 1 nos of T75  on board, support horizontal screen vertical connection (Z-type connection) function, flexible expansion of the loading height

Support 3 channels of 220V traffic light signal access, support 1 set of straight signal lights, mostly used for sidewalk crossings

Coated with UV three-proof glue, the national standard double 85 protection level, dustproof, moisture-proof, anti-static, anti-salt spray.

-40℃~80℃ ambient temperature, 3.5V-5.5V wide voltage, 7*24 hours uninterrupted power supply, ≤0.3% failure rate.

Hotline:

+86 15921814956
+86 15850351852

BX-JT products are professionally equipped with LED traffic signal screens to meet countdown and comprehensive information display
Comply with the national standard of GA/T508-2014 "Road Traffic Signal Countdown Display"
Comply with "T COEMA 102S-2018 General technical requirements for asynchronous non-gray LED display controller (card)"

 

1. Strong professionalism
(1) Intelligent and fully automatic following the status of traffic lights, seamless connection with various brands of traffic signals, free of secondary development;
(2) JT1 supports 3-way 220V traffic light signal access, supports 1 set of straight signal lights, and is mostly used for sidewalk crossings;
     JT3 supports 9-way 220V traffic light signal access, and supports 3 sets of signal lights for going straight + turning left + turning right, which is suitable for various complex traffic crossings;
⑶ Support two system access modes:
     A. Directly connect the 220V traffic light signal through the special interface for the signal light, automatically follow the change of the traffic light signal, and switch the corresponding LED information display. It is ready to use, eliminating the need for adaptation development with various traffic signal communication protocols.
     B. Connect with the traffic signal through the 100M network port or RS485 interface, adapt the communication protocol, and switch the corresponding LED information display after receiving the signal command.
⑷ Support intelligent tracing point, convenient to adapt to various special modules and full-color modules. Support horizontal screen vertical connection (Z-type connection) function, flexibly expand the load height.

 

2. Rich interfaces and sophisticated technology
⑴ Onboard full communication interface: 100M network port + RS232 + RS485 + USB + WiFi interface; optional wireless WiFi, support mobile APP;
⑵ Optional BX-4Gm module, support 4G wireless communication + Chinese voice broadcast;
⑶ Optional BX-YYm module, support Chinese and English voice broadcast function, to meet the project voice requirements;
⑷ Onboard brightness sensor interface, supports automatic brightness adjustment and time-sharing brightness adjustment;
⑸ The whole series is coated with UV three-proof glue, the national standard double 85 protection level, dust-proof, moisture-proof, anti-static, anti-salt spray;
⑹ The whole series is packaged in plastic shell bracket, which is flame retardant, environmentally friendly, anti-static, high temperature resistant, and directly on the screen;


3. Multiple industrial-grade quality control guarantees, stable performance
⑴ -40℃~80℃ ambient temperature;
⑵ 3.5V-5.5V wide voltage;
⑶ 7*24 hours of uninterrupted power supply, ≤0.3% failure rate;
⑷ IP group settings, MAC conflict detection;
⑸ U disk super reading, U disk extension cable ≤ 15m stable transmission;
⑹ Isolate network invalid data, adapt to busy and complex network, and make communication more stable.

Technical parameters
Status Launched into market in April, 2022
Control size  Single /dual/tri-color ≤32K:W≤2048
Storage 4GByte
Programs Support 128 programs,For special requirements, can be customized.
Areas Support 24 areas. For special requirements, can be customized.
Area type Weather, image&text, subtitle, video, lunar, timer, dial, timing, sensor, dynamic, colorful font area
Frame Area/program colorful frame
Clock Lunar /Dial/ Chinese and English clock/timer (all support multi-groups)
Software function Grouping cluster management/multi-program edit/multi-area display/multi-language version

 

Module compatibility
Module Support all kinds of full color  color modules
Column driver IC Support 74HC595,common  constant current chip, double latch chip and other mainstream LED drive chip ,not support PMW chips
Row decoding IC Support 74HC138 row decoding/none decoding module, and not support other row decoding IC
Scan mode Support smart scan,support any kinds of scan mode from static to 1/32
Module empty spot Support any empty spot

 

Interface 
Output port 1 nos T12 and 1 nos T75 ports
Communiction 100M Ethernet+RS232+RS485+USB(WIFI is optional)
Sensors IR controller, brightness sensor ,RS485 environmental sensor socket on board 
Signal lights port Support 3 channels of  220V traffic light signal access, support 1 set of straight signal lights, mostly used for sidewalk crossings

 

Important functions
Communication Support LAN and internet communication, IP online configuration and group setting, auto checking MAC inflict and IP inflict.Support RS232 and RS485 serial communication; support U disk download, U disk extension cable ≤ 15m stable transmission; WIFI and 4Gm is optional.
Program displaying Adaptive release of programs for different screens
Brightness adjustment 16-level brightness adjustment, supports manual adustmet /automatic adjustment by time period and environment adaptive brightness adjustment
Sensor function Support brightness sensor
Voice broadcast Support YYm,support Chinese&English voice broadcast
Environmental monitor sensor

Support  wind speed, wind direction, air quality, noise, atmospheric pressure, light, and negative oxygen ions sensor display.

Support customized access and display of sensors such as radar speed, water level, and rainfall;

Weather report Support China & overseas weather report,support more then 21000 overseas cities, and all Chinese districts.
Fast set screen parameter Support saving and reading back of screen configuration parameters
Any typesetting rules The all-round editor conveniently supports any typesetting rules such as Mongolian, Hebrew, Arabic, etc., and easily realizes horizontal and vertical layout.
Second development Support WINDOWS/LINUX/ANDROID/iOS SDK, including all kinds of dynamic, communication protocol and testing routine. Support JAVA/C/C++/C#/Delphi language, users can do second development in all kinds of platforms.
Cloud application and information safety

Support iLedCloud/iLEDSys platform (National protection grade: level 3) and support iLedCloud wechat mini program, edit and send program by mobile equipment.
Functions: real name authentication, many different grade roles, edit/check/release program, self-adapt program, etc.
Remotely manage LED displayes and monitor the status of LED displays. Create program report, online monitor informations on screen, and guarantee safety of informations.

 

System update and maintenance
Platform update iLEDCloud and iLEDSys update online;
Support firmware update online,cost efficient
Firmware update

Support firmware update online,cost efficient

 

Electricity parameters
Working voltage 5V(3.5V~5.5V wide working voltage)
Max power ≤10W

 

Environmental adaption
Working temperature -40℃~80℃
salt-spray resistant level There is no problem for the distance 500M from sea 

 

Electromagnetism compatibility
Wireless harass Testing for power supply port, LAN and serial port, all reach the standard
Immunity of discharging static electricity

Testing for LAN, serial, USB, sensor, I/O ports. Level 4,  discharging 8KV. Reach the standard

Surge impact Testing for power supply port and LAN port. Level 4, discharging voltage is 4KV.

 

Quality assurance
Quality standard 7*24 hours power-on, fault rate ≤0.3%
Construct protection

Plastic bracket, inflaming retarding, insulation, antiseptic, environmental, anti-static, high temperature resistance

Apperance protection UV three-protection glue for all types, national standard 85 protection level, dust prevention, dampproof, anti-static, salt-spray proof

 

Terminal management and auto control
 Network communication Support LAN and internet
Manage device PC,Android and IOS
Remote control System parameters configuration, program playing controlling, update sending program, adjust brightness automatically, turn on/off screen by timing.
Software

LedshowYQ(PC software), Ledmedia( mobile phone APP)
Cloud platform:iLEDCloud, iLEDCloud wechat mini program, iLEDSys(enterprise version/setup separately)

Copyright (C) 2008 Shanghai ONBON Technology Inc. Web all rights reserved
沪ICP备08109710号 沪公网安备 31010402000803号